TBolt USA, Since 2004 • contact@tboltusa.comText 704-826-5887Request a Call Back

Welcome to the TBoltUSA Tech Database! To visit our store, click here, or use the menus at the top of the page.

Getting started with a new Carb
TBolt USA Tech Database!


TECH-0127


GETTING STARTED GETTING A NEW CARB

Here is how to get started:

You must start with a known good and properly oiled air filter 

READ the jetting guide
https://tboltusa.com/store/tech.php?pID=61/Simple+Guide+to+Jetting

Set the adjustment screws to 1.5 turns out
(2.5 out on bottom fuel screw 22mm mikuni)

Bolt the carb on

If it bogs off idle go up on the pilots till it stops and comes clean off the idle

Do a plug read
Go up or down mains till its close to Tan / light brown

Fine tune with the Needle

Fine tune with the air - idle - fuel screws

Go riding

Home

Pit bike Buying and Ownership info

Pit Bike Wiring Info

General Motorcycle Maintenance

Identifying Parts, Bikes, and Engines

General Motorcycle Troubleshooting

Pit Bike Installation Info

How Things Work

Parts Diagrams and Breakdowns


97 9