TBolt USA is open and filling orders quicker than ever!
Email: contact@tboltusa.comText 704-826-5887Request a Callback

Welcome to the TBoltUSA Tech Database! To visit our store, click here, or use the menus at the top of the page.

How to re-install the clutch washers / Plate on a rear clutch motor & Clutch info
TBolt USA Tech Database!


TECH-0116


How to re-install the clutch washers / Plate on a rear clutch motor

With the clutch basket in place:
1)Place the thicker slotted washer on the main shaft and turn 1/8 turn to expose the slots in the shaft
2)Place the thinner pronged washer points down or tward the engine
3)Place the Hub with threaded towers down / centered
4)Stack plates starting with fiber first , aligning inner tabs
5)Place hub down , washer , tighten lock nut

Mechanical Theory:
The Basket can spin freely on the main shaft
and the hub is locked to the main shaft
the two only connect via the friction of the clutch plates

Clutch Info:
Always oil all surfaces of the Drive and driven plates during install  

Home

Pit bike Buying and Ownership info

Pit Bike Wiring Info

General Motorcycle Maintenance

Identifying Parts, Bikes, and Engines

General Motorcycle Troubleshooting

Pit Bike Installation Info

How Things Work

Parts Diagrams and Breakdowns


99 9