Welcome to the TBoltUSA Tech Database! To visit our store, click here, or use the menus at the top of the page.
GETTING STARTED GETTING A NEW CARB
Here is how to get started:
You must start with a known good and properly oiled air filter
READ the jetting guide
https://tboltusa.com/store/tech.php?pID=61/Simple+Guide+to+Jetting
Set the adjustment screws to 1.5 turns out
(2.5 out on bottom fuel screw 22mm mikuni)
Bolt the carb on
If it bogs off idle go up on the pilots till it stops and comes clean off the idle
Do a plug read
Go up or down mains till its close to Tan / light brown
Fine tune with the Needle
Fine tune with the air - idle - fuel screws
Go riding