TRC ONE X4 TX SWINGARM KIT
Specifications:
- Total Length: 18.5inches or 470mm
- Center to Center spacing from center of axle slot to center of pivot bolt: 16.5 inches or 420mm
- Pivot Axle Size: 10mm and 7 7/8inches long or 200mm long
- Width at Pivot Axle: 4.75 inches or 120.65mm
- Rear axle length - Approximately 9 1/4 inches or 235mm
Kit Includes:- Swingarm Axle
- Chain Slider
- Chain Guide
- Chain adjusters
- Front Brake Line Bracket
- 15 mm Rear Axle TRC-2048 (225mm long with 38mm wide and 25mm wide spacers)
- 15mm Axle Blocks
- Pivot Bearings 6202RS
Recommended:- (For helping with KLX 110 swaps) Upper shock mount - SCF-5436
- Note: Parts below will allow for upgrade to 12mm pivot axle bolt:
- Swingarm bearings: - 16101-2RS
- Axle (+10mm) - WHS-2375
- Please put your bike on a stand an measure first but customers have use WHS-1347 rear shock with good results
Note:
This is a replacement swingarm for Pitster Pro X4 and SSR TX bikes and similar China bikes
This swingarm will mount to a KLX110 however many many custom fabrications will be needed for the brakes.
Note: HARDWARE IS NOT INCLUDED. This kit only comes with what is shown and listed.