TRC ONE X4 TX SWINGARM KIT

TRC ONE X4 TX SWINGARM KIT

Specifications:

• Total Length: 18.5inches or 470mm
• Center to Center spacing from center of axle slot to center of pivot bolt: 16.5 inches or 420mm
• Pivot Axle Size: 10mm and 7 7/8inches long or 200mm long
• Width at Pivot Axle: 4.75 inches or 120.65mm
• Rear axle length - Approximately 9 1/4 inches or 235mm

• Swingarm Axle
• Chain Slider
• Chain Guide
• Chain adjusters
• Front Brake Line Bracket
• 15 mm Rear Axle TRC-2048 (225mm long with 38mm wide and 25mm wide spacers)
• 15mm Axle Blocks
• Pivot Bearings 6202RS

• (For helping with KLX 110 swaps) Upper shock mount - SCF-5436
• Note: Parts below will allow for upgrade to 12mm pivot axle bolt:
• Swingarm bearings: - 16101-2RS
• Axle (+10mm) - WHS-2375
• Please put your bike on a stand an measure first but customers have use WHS-1347 rear shock with good results 

Note:
This is a replacement swingarm for Pitster Pro X4 and SSR TX bikes and similar China bikes
This swingarm will mount to a KLX110 however many many custom fabrications will be needed for the brakes.

Note: HARDWARE IS NOT INCLUDED. This kit only comes with what is shown and listed.