Note: All new wheels require a spoke break in period, until the spokes are settled in,
You must check your spokes.
Please Check all wheel spokes.
Re-Check all spokes after EVERY ride for the first 5-10 rides
until they settle in place, then check periodically.
We offer a SPOKE WRENCH Part No. W-57-0006
TBparts new high quality and affordable wheel option.
heels come ready to run from bearings to the rim.
Factory install high quality NTN bearings with the proper spacer behind/between them.
OEM style “bolt in place” cast aluminum hub painted in silver to match the OEM brake panel (TB logo is also cast in).
Size:Rear 12×1.6″
Key Features
- Drilled for rim lock
- Factory installed NTN wheel bearings
- OEM style “bolt on” hub with TB logo
- Oversized Stainless steel Spokes
- 7050 aluminum rim in satin black with TBparts logo
- Laced and ready to bolt on!
Note: We recommend re-torquing your axle nut after the first 15 min of ride time. OEM specs of 25ft-lbs for the front and 43ft-lbs for the rear.
After 1 hour of ride time the spokes should be checked to make sure they are tight.
Keeping your spokes tight is a good way to ensure a long life out of the wheel. True your wheels for best results. Torque specs 55 INCH – LBS
The steel brake drum is painted to avoid rust for storage, it will wear in once used.
