Note: All new wheels require a spoke break in period, until the spokes are settled in,
You must check your spokes.
Please Check all wheel spokes.
Re-Check all spokes after EVERY ride for the first 5-10 rides
until they settle in place, then check periodically.
We offer a SPOKE WRENCH Part No. W-57-0006
TBparts new high quality and affordable wheel set option.
heels come ready to run from bearings to the rim.
Factory install high quality NTN bearings with the proper spacer behind/between them.
OEM style “bolt in place” cast aluminum hub painted in silver to match the OEM brake panel (TB logo is also cast in).
Size:Rear 12×1.6″ and Front 14×1.4″
Key Features
- Drilled for rim lock
- Factory installed NTN wheel bearings
- OEM style “bolt on” hub with TB logo
- Oversized Stainless steel Spokes
- 7050 aluminum rim in satin black with TBparts logo
- Laced and ready to bolt on!
Note: We recommend re-torquing your axle nut after the first 15 min of ride time. OEM specs of 25ft-lbs for the front and 43ft-lbs for the rear.
After 1 hour of ride time the spokes should be checked to make sure they are tight.
Keeping your spokes tight is a good way to ensure a long life out of the wheel. True your wheels for best results. Torque specs 55 INCH – LBS
The steel brake drum is painted to avoid rust for storage, it will wear in once used.
