OFF ROAD USE COMPETITION ONLY THIS IS A COMPETITION USE MOTORCYCLE AND IS INTENDED FOR OFF-ROAD USE ONLY
EVERY Pitster we sell is The Latest Version and Brand New with all of the latest upgrades
Excited about getting your bike, and setting it up? Check out the Pit Bike Shipping Info and Pit Bike Set Up Info in our Tech Database to get an idea of how quick and painless the process is.
BASICS
Manufacturer Pitster Pro Model MXR 155 MSRP $2099.99 Available Colors Gray
ENGINE
Displacement 155cc Engine Type Air cooled, single cylinder 4-stroke Bore/Stroke 60mm x 55mm Final Drive 420 Chain / 16T x 39T Fuel Delivery 26mm carburetor Fuel Unleaded Pump Gas (Run Premium When Available) Recommended Engine Oil 10W-40 Petroleum Based (Nonsynthetic)
IGNITION
Kick Start Yes Electric Start No CDI Yes Auxiliary Output Yes
TRANSMISSION
Transmission Close ratio 4-speed manual Shift-Pattern 4-Up Clutch 6 Plate HD
CHASSIS
Front Suspension GPX hydraulic telescopic oil fork
Rear Suspension Chromoly, single shock w/ adjustable preload
Travel Swing Arm MX style
Frame Chromoly with cradle
Subframe Chromoly, removeable
WHEELS
Front Wheel 1.40 x 14" Front Tire 60/100-14 Front Brake 190mm W-style rotor w/ floating caliper Rear Wheel 1.85 x 12" Rear Tire 80/100 x 12 Rear Brake 190mm W-style rotor w/ floating caliper
DIMENSIONS
Wheelbase 44.5 Inches Seat Height 32 Inches Curb Weight 144.5 lbs Fuel Capacity 1 Gallon Ground Clearance 8.5 Inches Overall Length 61 Inches Overall Width 28 Inches
IMPORTANT ENGINE STARTING INFORMATION
You may want to consider setting up the bike on a stand for a solid starting location at first until your confident
Turn on Both Fuel and Choke
DO NOT open the throttle (do NOT turn the throttle)
Move the starter down until it gets stiffer, your looking for top dead center
Let the starter come back up and give a full strong swift kick ALL the way thru
REPEAT (If necessary)
DO NOT KICK RAPIDLY
When warm just do not use the choke
Flooded Engine:
IF your flooded , pull the plug, kick it over about 10 times WITH THE PLUG OUT
Put in a NEW PLUG
For ease of starting:
You may want to consider our TRC EZ START HIGH PERFORMANCE CDI
Part No. TRC-9745 (NOT FOR USE ON ZS190s)
One more thing:
At times it helps to just crack the throttle a
tiny bit to let air in.
Available Options:
Shipping: Flat Rate (+$275.00)