JTI Products - Rear Brake Pedal - KLX110 & KLX110L

Vital Information
Part No JTI-10381
Stock Level 2 Left


Every component is constructed of CNC machined 6061 billet aluminum. Nothing is cast, bent, or pressed. The pedal arm is black texture powder coated and nearly 1/2" thick at its narrowest point. That's almost double the thickness of our competitors'. Our unique design runs over the top of the pegs but under the kick starter so there is no interference with the engine case or kicker, so it will work with the stock kick starter. No spacing or modifications required, even on the 110L. For drum brakes only. Works with stock peg mounts as well as the JTI peg bracket and Corso Plate. This design requires you to flip the link on your drum and run the adjustment rod above the swingarm, protecting it from the ground and obstacles. The pedal tip has (3) three positions so you can adjust the distance to your liking. The remaining holes can be used for a brake saver (sold separately). Compatible with BBR Super Stock swingarm (not BBR peg bracket). 

2002-Present Kawsaki KLX110/KLX110L
2003-2006 Suzuki DR-Z110 

Parts Included: Brake pedal assembly / Pedal hardware / Installation instructions 

Note: Requires drum brakes to be in good operating condition and brake pivot rod to be in correct position. (many are bent but can normally be straightened successfully)

(1 Reviews)

Since 2004, every purchase from TBolt USA includes access to technical support from our staff of experts and our online Pit Bike Technical Info Database!

We have all necessary support parts on hand.

Most orders ship same, or next business day, unless otherwise noted above.


Share Product
Share on Twitter Share via E-Mail